Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Check for open circuits in wires between test box and connector according to wiring diagram.
Terminal 1 + socket 72
Terminal 2 + socket 73
Terminal 3 + socket 36
Terminal 4 + socket 35
Terminal 5 + socket 33
Terminal 6 + socket 34
Wire resistance: max. 1.5 ohms
-
Also check wires for shorting to B+ or Ground (GND).
-
Also check for shorting between wires.
If no malfunctions are found in wires:
-
Replace accelerator pedal position sensor.
If the accelerator pedal position sensor has been replaced in a vehicle with an automatic transmission the Engine Control Module (ECM) must also
re-learn the kick-down point.