Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Fig. 13 Kickdown switch -F8-
Location: Kickdown switch (arrow) is integrated into accelerator cable and is located on bulk head in engine compartment.
Removing and installing kickdown switch
-
Remove the accelerator cable to remove and install the kickdown switch, then reinstall cable and adjust.
NOTE: On engines with electronic power control (EPC), the Throttle Position (TP) sensor -G79; sender -2- for accelerator position takes over the
functions of the kick-down switch. If the Engine Control Module (ECM), throttle valve control module or throttle position sensor are replaced, the
kick-down switch position must be learned again.
Fig. 14 Brake light switch -F-
Location: Brake light switch is located on pedal cluster.
Fig. 15 Starting interlock relay -J207-
Location: Relay is located on relay plate below dash panel, left.