Passat Syncro Wagon V6-2.8L (ATQ) (2000)
bank 1
4
-
3-way connector
-
Brown
-
for Knock Sensor (KS) 1 -G61-, cylinder bank 1
5
-
Engine Coolant Temperature (ECT) sensor -G62-
6
-
Secondary Air Injection (AIR) solenoid valve -N112-
-
Secondary Air Injection system:
7
-
Intake Air Temperature (IAT) sensor -G42-
8
-
Intake manifold change-over valve -N156-
9
-
Throttle Valve Control Module -J338-
10
-
4-pin harness connector
-
Black
-
for Heated Oxygen Sensor (HO2S) 2 -G108-, bank 2 before catalytic converter and oxygen sensor heater -Z28-, cylinder bank 2
11
-
3-way connector
-
Brown
-
For Knock Sensor (KS) 2 -G66-, cylinder bank 2
12
-
3-way connector
-
Gray
-
For Engine Speed (RPM) sensor -G28-
13
-
Engine Control Module (ECM)
(control module for Motronic -J220-)
-
Installation location: in protective housing, radiator tank on left
14
-
Fuel pressure regulator
15
-
Camshaft Position (CMP) sensor 2 -G163-
-
Engine bank 2
16
-
Heated Oxygen Sensor (HO2S) 2 -G108-, bank 2 before catalytic converter, 50 Nm
17
-
Engine Speed (RPM) sensor -G28-
18
-
Knock Sensor (KS) 2 -G66-
-
Engine bank 2
19
-
Valve -2- for camshaft adjustment -N208-
-
Engine bank 2
20
-
Ignition coils (-N-, -N128-, -N158-)
-
With power output stage -N122-
21
-
Knock Sensor (KS) 1 -G61-
-
Engine bank 1
22
-
Fuel injector (-N30-, -N33-, -N83-, -N84-)
23
-
Camshaft Position (CMP) sensor -G40-
-
Engine bank 1
24
-
Ground connection
-
On engine bracket, right side
25
-
Heated Oxygen Sensor (HO2S) -G39-, bank 1 before catalytic converter, 50 Nm
26
-
Valve -1- for camshaft adjustment -N205-
-
Engine bank 1
27
-
Secondary Air Injection pump motor (V101)
-
Secondary Air Injection system:
28
-
Mass Air Flow (MAF) sensor -G70-
29
-
Evaporative Emission (EVAP) canister purge regulator valve -N80-
-
On air cleaner housing
-
EVAP system: