Passat Syncro Wagon V6-2.8L (ATQ) (2000)
NOTE:
Metal bracket tool and bolts must be retained for future use
-
Unclip bracket latch holding fuel lines by pushing bracket up from underneath to unclip, then pull bracket outward to allow fuel lines to move
freely
-
Remove plastic cover over air filter housing
-
Unclip bracket holding fuel lines near air filter housing -arrow- by pushing down on bracket to unclip, then pull bracket outward to allow fuel
lines to move freely
-
Check center fuel line -arrow- for signs of cracking or fuel leaks
-
If fuel line shows visible leaks or cracks, proceed to Section D
-
If no cracking or fuel leaks are found, close brackets and continue