Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Mark supply and return line and disconnect
-
Seal lines so the fuel system is not contaminated with debris
-
Remove locking ring using special wrench -3087- for tank sensor
-
Pull flange and seal out of the opening in fuel tank
-
Disconnect connectors -1- (white) and -2- (black) from inside of flange
-
Unclip distributor piece -1- from lower part of baffle housing by pressing the two catches -2-, positioned one behind the other, toward outside
-arrow A- then disconnect distributor piece -arrow B-
-
Disconnect fuel return line -1- from distributor piece - 2- by releasing hose coupling of return line using release tool -T40020-