Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Section F - Visual Inspection/Vent Line Check
(2001-2005 4Motion vehicles)
-
With vehicle still on hoist, remove both bolts -arrow- from heat shield just above rear differential pinion flange
TIP: If parking brake cable is obstructing bolts on either side, move cable over to remove bolts
-
Remove bolts -black arrows- for exhaust hangers on both left and right exhaust pipe, then remove both bolts -white arrow- for left and right fuel
tank straps
NOTE:
This will allow for more clearance between fuel tank and access hole under rear seat bottom
-
Visually check fuel tank ventilation valve and surrounding area for fuel leak
-
If fuel leak is found go to Section G
-
If no fuel leak is found, continue with procedure
NOTE:
Picture shows tank removed for clarity
DO NOT REMOVE TANK UNLESS FUEL LEAK IS FOUND
-
Remove zip tie -arrow- securing vent line to electrical wiring to allow vent line to move freely