Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Seat Belt: Testing and Inspection
Check Points
Check Points
-
Check belt webbing
-
Check automatic retraction (stop function)
-
Visual inspection of belt latch
-
Function test of belt latch
-
Checking guide stops and seatbelt lock tongue
-
Check anchoring components and anchoring points
-
Check lap belt automatic belt retractor
NOTE: Make a note if customer refuses to allow replacement of damaged seatbelt.
Check belt webbing
-
Pull out belt webbing completely from automatic belt retractors or lap belt adjusting tab.
-
Check belt webbing for soiling, wash with mild soap solution if necessary also operating instructions.
-
If one of the types of damage (1 or 2) shown in the following is detected on a vehicle which has been in an accident - seatbelt must be replaced
completely with belt latch and seatbelt height adjuster.
-
If one kind of damage under points 1,2,3 and 4 is detected on a vehicle which has not been in an accident, only the damaged seatbelt needs to be
replaced.
-
Belt webbing cut, torn or chafed.
-
Webbing loops on belt edge tom.