Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Seat Belt Tensioner: Locations
Front Seat Belts With Belt Tensioners, Assembly Overview up to 09.00
Front Seat Belts With Belt Tensioners, Assembly Overview > 09.00
CAUTION!
Before starting any body disassembly, straightening or any other body repair work, the belt tensioner units must be removed.
1
-
Belt height adjustment
-
To remove the height adjustment, remove B-Pillar trim beforehand
2
-
D-ring
3
-
Belt guide
-
Fastened with 2 Phillips head screws
-
Tightening torque: 1.5 Nm
4
-
Seat belt with belt tensioner
-
To remove, take out lower B-pillar trim beforehand and remove sill panel
-
Retaining tab determines the position of belt retractor
-
By loosening the belt retractor bolt - 6 - belt tensioner is secured, and in reverse it is functional again
5
-
Buckle front
6
-
Hex head bolt
-
40 Nm