Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Connect VAG 1598/31 test box to control module wiring harness. Engine Control Module (ECM) is not connected.
-
Check for breaks in wires between test box and 4-way connector (see wiring diagram).
Terminal 1 + socket 53
Terminal 2 + socket 27
Terminal 4 + socket 29
Wire resistance: max. 1.5 Ohms
-
Also check wires for shorts among one another.
-
Also check wires for shorts to battery B+ or Ground (GND).
If no DTCs are found in wires:
-
Replace Mass Air Flow (MAF) sensor -G70- item 7