Passat Syncro Wagon V6-2.8L (ATQ) (2000)
![background image](/volkswagen/passat_syncro_wagon/v6-2.8l_(atq)/Page-1857002.png)
Fig. 4 Pulling front bushing out
Fig. 5 Pulling front bushing in
-
Insert bushing -A- in 8 mm recess in thrust piece 3346/1.
-
Pull bushing in onto stop.
Locating Control Arm Bushing, Replacing
Locating control arm bushing, replacing
Special tools required
CAUTION: Always use protective jaw covers when clamping aluminum control arms in a vise.
Pulling bushing out of control arm