Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Front Cross-Member: Service and Repair
Subframe, removing and installing
Special tools required
Removing
-
Support engine with support device.
-
Remove wheels.
-
Remove undertray.
-
Before loosening the subframe check that holes -1- and -2- align using special tool 3393.
Note: If the holes do not align, an alignment is required after installing the subframe.
-
Remove bolt -5-.
-
Remove nuts -3- and -4- and connecting link.
-
Remove support control arm nut -2- on subframe and remove bolt.
-
Loosen bolt -1-.