Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Axle Shaft: Service and Repair
Front Suspension
Drive Axle With Constant Velocity Joint
Drive axle with constant velocity joint, assembly
Grease quantity and type:
Constant velocity joints are packed with grease, Part No. G 000 603:
Regrease the joint, if necessary, when replacing the protective boot.
1. Circlip
^
Always replace
^
Remove and install with VW161a
2. Gasket
^
Replacing: Pull off protective foil and stick onto joint.
3. Inner constant velocity joint
^
Outer diameter: 100 or 108 mm depending on engine/transmission combination
^ Only replace complete
^
Pressing off refer to Fig. 3
^
Pressing on refer to Fig. 4