Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Flex Plate: Service and Repair
Drive Plate, Removing and Installing
Drive Plate, Removing and Installing
Special tools and equipment
-
3242 Clamping bolt
-
V.A.G 1331 Torque wrench (5-50 Nm)
-
V.A.G 1332 Torque wrench (40-200 Nm)
-
Depth gauge
Removing
-
Remove sealing plug from cylinder block, left.
-
Position crankshaft to TDC No. 3 cylinder. Crankshaft TDC drilling must be visible (or be able to be felt) in sealing plug hole.
-
Screw damping bolt 3242 into hole so that crankshaft is secured against turning.