Passat Syncro Wagon V6-2.8L (ATQ) (2000)
1
-
Rear window
2
-
Dimension - a - = 4 mm
3
-
Sealing lip (component part of pre-coating)
4
-
PUR adhesive sealant
-
Bead cross section.
-
Width = 7 mm
-
Height = 11 mm
-
Including pre-coating, residual material on window and window flange.
-
Minimum curing time.
5
-
Dimension - b - = 6.5 mm
6
-
Dimension - c - = 4.5 mm
Undamaged Rear Window, Removing
Undamaged Rear Window, Removing
-
Disconnect harness connectors for heated rear window and press connector tabs onto window.
-
Remove auxiliary brake light.
-
Remove upper trim for trunk lid.
-
Loosen sealing lip from window flange using plastic wedge and spray in Cleaning solution D 009 401 04 (as a substitute for lubricant).