Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove bolts - 2 -, tightening torques: 20 Nm.
-
Remove bolts - arrows -. Remove upper assembly carrier from door, lift and lift out from door toward hinge side of door.
-
Rotate assembly carrier and disconnect harness connector from door lock.
-
Unclip clips for electrical wires from rear side of assembly carrier.
Installing
-
Insert assembly carrier into door.
-
Insert bolts and tighten in specified sequence, tightening torque: 8 Nm.
-
Insert door window - 1 - into door.
-
Press door window - 1 - into window channel - arrow - and tighten clamping brackets with bolts - 2 -.
Tightening torque: Bolts - 2 - 9 Nm.