Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Rain Sensor: Service and Repair
Rain Sensor -G213-, Removing And Installing
Removing
-
Remove interior rear-view mirror (with rain sensor)
-
Unclip cable guide -arrows 1- and remove.
-
Separate rain sensor -1- from mirror mounting -2-.
-
Remove interior light.
-
Remove center sun visor.
-
Separate electrical connection for rain sensor (under interior light) and pull harness out from under headliner towards windshield.
Installing
Installation is in reverse order of removal, noting the following:
NOTE:
-
Rain sensors must always be replaced after removal. Do not reuse. Removal of sensor from mirror mounting damages mounting adhesive and
subsequently affects proper function of sensor.
-
Prior to installing sensor, thoroughly clean mounting surface (must be free from all residue and particles).