Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Brake Pedal Assy: Service and Repair
Brake pedal, removing and installing
WARNING: The brake pedal travel must not be restricted by additional floor coverings.
1. Mounting bracket
2. Pivot pin for clutch and brake pedal
-
Installation position: Groove (arrow) faces toward clutch pedal.
3. Locking clip
4. 23 Nm (17 ft. lbs.)
5. Brake pedal
-
Place on pin
6. Clutch pedal
-
Clutch master cylinder adjustment dictates position.
-
Removing and installing
7. Pin
8. Locking clip
9. Master cylinder
10. 20 Nm (15 ft. lbs.)
11. Over-center spring mounting
-
Install in mounting bracket
12. Over-center spring
-
For application see parts listing
-
Removing and installing
13. Bolt
-
5 Nm (44 inch lbs.)
-
Secures clutch pedal and brake pedal pivot pin
14. Seal
15. Bolt
-
25 Nm (18 ft. lbs.)
-
Secures brake master cylinder and brake booster