Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Counter-hold viscous coupling pulley with spanner 3212 and remove viscous coupling using wrench 3312 (left-hand thread, -arrow-).
-
Turn tensioning roller clockwise -arrow- with wrench on securing bolt
-
When holes align -arrows-, secure tensioning roller with pin 3204
-
Remove ribbed belt.
Installing
-
Route ribbed belt to crankshaft pulley/vibration dampener first. Slide belt onto tensioning roller last.
Remaining installation is in reverse order of removal.
CAUTION!
-
Viscous coupling must be torqued to 40 Nm (30 ft. lb.) (left-hand thread) using wrench 3312.
-
After installing ribbed belt, check for proper seating and alignment with engine running.