Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
For Knock Sensor (KS) 1 -G61-, bank 1
5
-
Engine - Coolant Temperature (ECT) sensor -G62-
6
-
Secondary Air Injection (AIR) solenoid valve -N112-
7
-
Intake Air - Temperature (IAT) sensor -G42-
8
-
Intake Manifold Tuning (IMT) valve -N156- (change over valve)
9
-
Throttle valve control module -J338-
10
-
Harness connector
-
4-pin connector, black
-
For HO2S 2 -G108- and O2S heater -Z28-
-
Bank 2, sensor
11
-
Harness connector
-
3-pin connector, blue
-
For Knock Sensor (KS) 2 -G66-, bank2
12
-
Harness connector
-
3-pin connector, gray
-
For Engine Speed (RPM) sensor -G28-
13
-
Motronic Engine Control Module (ECM) -J220-
-
Location See in protective housing in plenum, left side
14
-
Fuel pressure regulator
15
-
Camshaft Position (CMP) sensor -G40-
-
Cylinder bank 2
-
Location, See: Camshaft Position Sensor/Service and Repair
16
-
Heated Oxygen Sensor (HO2S) 2 -G108-
-
Tightening torque: 50 Nm (37 ft lb)
-
Cylinder bank2
17
-
Engine Speed (RPM) sensor -G28-
18
-
Knock Sensor (KS) 2 -G66-
-
Cylinder bank 2
-
Removing and installing, See: Knock Sensor/Service and Repair
19
-
Valve -2- for camshaft adjustment -N208-
-
Cylinder bank 2
20
-
Ignition coils -N-, -N128-, -N158-
-
With power output stage -N122-
-
Removing and installing, See: Ignition System/Ignition Coil/Service and Repair
21
-
Knock Sensor (KS) 1 -G61-
-
Cylinder bank 1
-
Removing and installing, See: Knock Sensor/Service and Repair
22
-
Fuel injectors
-
Cylinder 1: -N30-
-
Cylinder 2: -N31-
-
Cylinder 3: -N32-
-
Cylinder 4: -N33-
-
Cylinder 5: -N83-
-
Cylinder 6: -N84-
23
-
Camshaft Position (CMP) sensor 2 -G163-
-
Cylinder bank 1
-
Removing and installing, See: Camshaft Position Sensor/Service and Repair
24
-
Ground connection
-
On engine support, right
25
-
Heated Oxygen Sensor (HO2S) -G39-
-
Tightening torque: 50 Nm (37 ft lb)
-
Cylinder bank 1
26
-
Valve-1- for camshaft adjustment -N205-
-
Cylinder bank 1
27
-
Secondary Air Injection (AIR) pump motor - V101-
28
-
Mass Air Flow (MAF) sensor -G70-
29
-
Evaporative - Emission (EVAP) canister purge regulator valve -N80-
-
On air cleaner