Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Axle Beam: Service and Repair
Removing and Installing
Axle Beam, removing and installing
Removing
-
Remove wheels.
-
Unbolt exhaust connection behind catalyst and remove rear part of exhaust system.
-
Secure driveshaft with wire (arrows) or similar, or constant velocity joint can be damaged.
CAUTION: Before removing the driveshaft, mark the installed position. Excessive imbalance could result if the driveshaft is re-installed offset
from the original position.
-
Determine distance between axle beam and sill inner side.
-
Unhook parking brake cable from brake calipers.