Passat Wagon L4-1781cc 1.8L DOHC Turbo (ATW) (2000)
-
Tension toothed belt, to do so, turn toothed belt tensioning roller -1- in direction of arrow using a hex socket (8mm) and extension (e.g. V.A.G
3114) until securing pin can be pulled out.
Note: Bolt -3- must not be loosened.
-
Then turn tensioning roller in opposite direction of arrow until piston is completely driven out (use mirror).
-
Turn crankshaft twice and check whether camshaft and crankshaft markings align properly with their respective points.
-
Install upper portion of toothed belt guard.
-
Install tensioner for ribbed belt.
Tightening torque: 25 Nm
-
Install ribbed belt.