Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Rear Door Latch: Service and Repair
Door Handle And Door Lock, Assembly Overview
Door Handle And Door Lock, Assembly Overview
1
-
Door lock
-
Door lock can only be removed in conjunction with assembly carrier.
-
Cover - 4 - was introduced as a running change in production for lock. It is clipped onto lock and must be installed again or retrofitted
when replacing door lock.
2
-
Cable
-
Lock release
3
-
Retaining bracket
-
Bolted and riveted to door lock.
-
Does not belong to door lock delivery casing.
4
-
Cover
-
Does not belong to door lock delivery casing.
-
Must be re-installed or retrofitted when replacing door lock.
-
Retrofit for all vehicles --> 09.99.
5
-
Mounting bracket
-
Removing: Door handle, lock cylinder housing and assembly carrier have been removed.
-
Remove bolt - 6 -, slide mounting bracket slightly to rear and remove from door.
6
-
Screw
7
-
Door handle with backing plate
8
-
Concealment cap
9
-
Housing
10
-
Base plate
11
-
Socket-head bolt
-
This bolt was replaced by a Torx bolt, and a new tool must be used for it