Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Power Seat Motor: Service and Repair
2-Way Lumbar Support Motor With Transmission, Removing and Installing
2-Way Lumbar Support Motor With Transmission, Removing And Installing
Removing
-
Remove Recaro seat.
-
Remove belt buckle.
-
Remove trim, backrest mounting bracket.
-
Remove spring cover.
-
Remove side seat trim.
-
Remove backrest.
-
Remove side airbag.
-
Remove cover and upholstery from backrest.
-
Remove backrest shell.
-
Remove 2-way lumbar support.
-
Cut two cable ties - 5 -.
-
Press together lumbar support body and disengage Bowden cable - 6 - in direction - arrow A -.
-
Slide retaining pin - 7 - in direction of arrow - arrow B - out of bracket.
-
Remove two bolts - 4 -.
-
Remove motor with transmission and Bowden cable - 3 - from lumbar support body - 1 -.
Installing