Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Oil Pan: Service and Repair
Oil pan, removing and installing
Special tools and equipment
-
Engine support bracket 10-222A with legs 10-222A/1
-
Workshop crane VAG 1202 A or equivalent
-
Hand drill with plastic brush
-
Silicone sealant D 176 404 A2
-
Punch, 5 mm diameter
-
Cable tie
Removing
-
Bring lock carrier into service position.
-
Drain engine oil.
-
Mark toothed belt direction of rotation.
-
Remove ribbed belt. See: Drive Belts, Mounts, Brackets and Accessories/Ribbed Belt/Service and Repair/Procedures
-
Remove A/C compressor ribbed belt tensioning roller complete.
-
Take off A/C compressor ribbed belt.
-
Secure viscous fan coupling belt pulley with a punch (5 mm diameter) -1-.
-
Remove viscous fan coupling securing bolt (with 8 mm hex key -2-) and remove viscous fan coupling with belt pulley.