Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
-
After function is completed, the VAG 1551 returns to the start position:
Indicated on display:
Rapid data transfer
HELP
Select function XX
Connecting VAG 1551
Connecting VAG 1551 Scan Tool (ST) and selecting functions (checking module version)
On Board Diagnostic (OBD), initiating
NOTE:
The following description refers only to the VAG 1551 Scan Tool (ST).
NOTE:
Connect Scan Tool (ST).
-
Switch on ignition.
Indicated on display:
VAG - On Board Diagnostic (OBD)
HELP
1 - Rapid data transfer
2 - Blink code output*
-
Two operating modes are displayed alternately
-
Press button -1- to select "Rapid data transfer" operating mode 1.
indicated on display:
Rapid data transfer
HELP
Enter address word XX
-
Press button -5- twice (2x). "55" is the address word for "automatic vertical headlight aim control system".
indicated on display:
Rapid data transfer
Q
55 autom vert headlight aim cntrl sys.
-
Press -Q- button to confirm input.
indicated on display:
Rapid data transfer
Q
Scan tool sends address word 55
Connecting VAS 5051
Connecting VAS 5051 Scan Tool
Diagnosis, testing and information system and selecting Engine Control Module (ECM)
All functions which could previously be performed with VAG 1551/1552 can also be performed with VAS 5051 in the On Board Diagnostic (OBD)
mode:
See Operating instructions for vehicle diagnosis, testing and information system VAS 5051.
Special tools, and equipment