Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
7
-
Accelerator cable
-
Do not reuse damaged accelerator cable, replace
8
-
Cable cam
-
On throttle valve control part
9
-
10 Nm
10
-
Support bracket
-
For accelerator cable
11
-
Retainer
12
-
Accelerator pedal
13
-
Mounting bracket
14
-
Accelerator pedal stop
Fig. 1 Removing and installing throttle cable mounting
Removing
-
Turn throttle cable mounting approx. 90° a counter-clockwise and remove from bulkhead in plenum chamber.
Installing
-
Push throttle cable through bulkhead in plenum chamber (arrow 1).
-
Push throttle cable mounting into bulkhead and turn approx. 90° clockwise (arrow 2).
Fig. 2 Installation position of accelerator pedal stop on mounting bracket
-
Letters "HS" -1- are visible when installed in vehicles with a manual transmission.
-
Letters "AG" -2- are visible when installed in vehicles with automatic transmission.