Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
-
VAG 1594 A Auxiliary test set
Work sequence
-
Adjust accelerator cable by moving retainer (arrow) at support bracket, so that Wide Open Throttle (WOT) position is attained at throttle valve
module.
-
Release accelerator pedal.
-
Disconnect 2-pin connector from kick-down switch -F8- in engine compartment (on bulkhead).
-
Connect multimeter VAG 1526 or Fluke 83 with auxiliary cables from VAG 1594 to kick-down switch.
-
Check resistance at switch.
-
Specification: Infinity Ohms
-
Slowly move accelerator pedal in direction of Wide Open Throttle (WOT).
-
Shortly after the kick-down pressure point resistance must drop to 0 Ohms. At this point the accelerator pedal must be just off the stop.