Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Clutch: Adjustments
Reverse Gear Brake -B1-
Reverse gear brake -B1-, adjusting
-
Install components to adjust reverse gear brake -B1- in transmission housing without shim (item 2). See: Service and Repair
1. Transmission housing
^
With input gear and planet carrier installed
2. Shim
^
1 or 2 shims can be installed
3. Outer plate -B1-
^
Quantity; See: Specifications
4. Inner plate -B 1-
^
Quantity; refer to Specifications.
5. Pressure plate
^
Installed with flat side facing plates
^
Part application according to transmission code letters
6. Dished washer
^
Convex side faces toward one-way clutch
7. One-way clutch with -B1- piston
Before removing or installing one-way clutch, remove valve body and sealing plugs.
remove Transmission Vehicle Speed Sensor (VSS) -G38-.
8. Circlip