Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Diesel engine and four-cylinder gas engine with air conditioning system.
^
Thoroughly clean connections and immediate vicinity before loosening.
^
Insert ATF lines completely by hand onto stop in transmission or cooler and then screw on.
^
After replacing ATF lines, check and fill ATF level, if necessary.
Diesel engines and four-cylinder gas engines with air conditioning
1. Bolt
^
5 Nm (44 inch lbs.)
^
Insert lines completely first and then tighten
2. O-ring
^
Coat with ATF
^
Always replace
3. Bolt
^
20 Nm (15 ft. lbs.)
^
Insert lines completely first and then tighten
4. O-ring
^
Coat with ATF
^
Always replace
5. Bracket
^
Insert onto stop on transmission
6. Bolt
^
10 Nm (7 ft. lbs.)
7. Union nut
^
30 Nm (22 ft. lbs.)
8. Clamp
9. Bolt
^
5 Nm (44 inch lbs.)
10. Bracket
11. Bracket
^
On engine/transmission support
12. Bolt
13. Nut
^
5 Nm (44 inch lbs.)
Cleaning