Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Shift Cable: Testing and Inspection
01N Automatic Transmission
Selector lever cable, checking and adjusting
Checking
-
Shift selector lever into Park position "P"
-
Take selector lever cable -1- off selector shaft lever -2- on transmission upward.
-
Move selector lever from "P" to "1 "
^
Shift mechanism and selector lever cable must move freely. If necessary replace selector lever cable or service shift mechanism.
-
Shift selector lever into Park position "P"
-
Shift selector shaft lever to "P." The parking lock should engage and it should not be possible to turn the two front wheels in the same direction.
^
It should be possible to push the selector lever cable onto the selector shaft lever. Adjust selector lever cable if necessary.