Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
Fig. 9 Pressing off 1st and 2nd gear synchronizer hub
-
Press synchronizer hub off with 1st gear
Fig. 10 Pressing off large tapered roller bearing inner race
-
Install outer race -A- to press off inner race
Fig. 11 Pulling out large tapered roller bearing outer race
-
Remove differential See: Service and Repair
-
Place puller 3128 pressure piece below outer race.
-
Install puller 3128 threaded pert with plate YW401 onto transmission housing.
When tightening the bolt the outer race will be pulled out of the housing.
Fig. 12 Pressing in large tapered roller bearing outer race
The smaller diameter of the special tool VW 204 b faces outer race.