Passat Wagon L4-1781cc 1.8L Turbo (AEB) (1998)
19. Buffer
20. Ball housing
21. Rear push rod
22. Socket head bolt
^
10 Nm (7 ft. lbs.)
23. Socket head bolt
^
25 Nm (18 ft. lbs.)
24. Washer
25. Gearshift housing
26. 10 Nm (7 ft. lbs.)
27. Self-locking nut
^
10 Nm (7 ft. lbs.)
^
Always replace
28. Selector fork
29. Bolt
30. Tensioning ring
31. Boot
^
Remove catalyst and front heat shield before removing and installing boot
Note:
^
Carefully pull boot over selector rod
^
Place boot on the marks on selector rod and push rod
32. Selector rod
33. Clamping piece
34. Socket head bolt
^
25 Nm (18 ft. lbs.)
35. Self-locking bolt
^
20 Nm (15 ft. lbs.)
^
Always replace
36. Socket head bolt
^
40 Nm (30 ft. lbs.)
37. Washer
^
The convex side faces to push rod
38. Washer
39. Front push rod
Fig. 1 Separating cover from shift knob
-
Turn cover inside out.
-
Carefully pry segment with a screwdriver in direction of arrow while pulling shift knob out.