Passat Wagon L4-2.0L Turbo (BPY) (2008)
Installing
Install in reverse order of removal.
CD Changer Removal and Installation Procedure II
‹› The CD changer is built into the glove compartment.
Before starting repair work, perform the following:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
If necessary, remove CDs remaining in CD changer => Owner's Manual.
Removing
-
Remove glove compartment from passenger side.
-
Remove glove compartment with installed CD changer from instrument panel.
-
Disconnect connector - A - on glove compartment and remove cable tie - arrow -.
-
Pull at tab - A - and CD changer lowers.