Passat Wagon L4-2.0L Turbo (BPY) (2008)
Rear Door Exterior Handle: Service and Repair
Door Components
Door Handle
Door Components
Door Handle
‹› Removing and installing the right door handle is described here. Removing and installing the left door handle is identical.
‹› Door handle remains standing in pulled-out position. Do not attempt to press door handle in, otherwise retaining tab on mounting bracket breaks
off and a removed door handle can no longer be installed.
Removing
-
Remove lock cylinder housing. Refer to => [ Lock Cylinder Housing ]. See: Service and Repair/Door Components/Removal and Installation/Lock
Cylinder Housing
-
Pull door handle - 2 - slightly toward rear - arrow a - out of mount of mounting bracket.
-
Swivel door handle around in direction of - arrow b -.
-
Remove door handle at right angle - arrow c - to door from mounting bracket - 1 -.
Installation
-
Insert door handle - 1 - at right angle to door - arrow a - into mounting bracket - 2 -.