Passat Wagon L4-2.0L Turbo (BPY) (2008)
Upper A-Pillar Trim
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
Removal
-
Remove airbag emblem - 1 - and remove screw - 2 - (2 Nm).
-
Remove trim in area of mounting clip - 3 - inward from mounts - arrow A -.
‹› For the sake of illustration, securing elements - 3 - are depicted as removed in the illustration.
-
Loosen trim from door seal molding - arrow B -.
-
Remove trim from front mounts in instrument cluster - arrow C -.
-
Remove trim upward out of mounts - arrow D -.
‹› When re-installing, airbag emblem - 1 - must be replaced.
‹› Before installing, inspect the securing clips for damage and replace if necessary.
Installation
-
To install, perform the steps used for removal in reverse order.
Upper B-Pillar Trim
Pillar Trim