Passat Wagon L4-2.0L Turbo (BPY) (2008)
Installation
-
To install, perform the steps used for removal in reverse order.
Center Storage Compartment Unit
Storage Compartments, Covers and Trim
Center Storage Compartment Unit
Removal
-
Switch off ignition.
-
Remove the glove compartment. Refer to => [ Glove Compartment ] See: Glove Compartment
-
Remove instrument panel center trim. Refer to => [ Center Instrument Panel Trim ] See: Center Instrument Panel Trim
-
Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] See: Instrument Cluster Trim
-
Remove passenger side instrument panel trim. Refer to => [ Passenger Side Instrument Panel Trim ] See: Passenger Side Instrument Panel Trim
‹› To provide a better overview, the adjacent components are only partially shown in the illustration.
-
Remove the two bolts - 1 - (1.5 Nm).
-
Remove center storage compartment unit - 2 - from instrument panel.
-
Disconnect wiring harness from warning light switch.