Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
First place roof rail - 6 - on roof, then guide angle bracket - 1 - over threaded screws until conical washers are centered in tolerance compensations
- 4 and 5 -.
-
Remove the hex head nut - 2 - until angle bracket comes in contact with roof.
-
Tighten bolts - 3 -, tightening specification: 20 Nm.
-
Tighten the nut - 2 - to 23 Nm.
-
If dents appear around the base of the roof rail, readjust angle bracket.
New Roof Rail Angle Bracket
-
Insert new angle bracket - 1 - until securing cap - 4 - engages in roof.