Passat Wagon L4-2.0L Turbo (BPY) (2008)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Lines From Tandem Brake Master Cylinder, Connecting to Hydraulic Unit
Brake Lines from Tandem Brake Master Cylinder, Connecting to Hydraulic Unit
To Tandem Master Brake Cylinder
A Primary piston circuit of master brake cylinder to hydraulic unit
Identification: diameter 8.5 mm or diameter 6 mm and tube fitting with thread M12 x 1
B Secondary piston circuit of master brake cylinder to hydraulic unit
Identification: diameter 8.5 mm or diameter 6 mm and tube fitting with thread M12 x 1
1
Hydraulic unit to left front brake caliper
3
Hydraulic control unit to left rear brake caliper
4
Hydraulic control unit to right rear brake caliper
To Hydraulic Unit
1
Hydraulic unit to left front brake caliper
Identification: diameter 5.25 mm and tube fitting with shorter thread M12 x 1
2
Hydraulic control unit to right rear brake caliper
Identification: diameter 5.25 mm and tube fitting with thread M 10 x 1
3
Hydraulic control unit to left rear brake caliper
Identification: diameter 5.25 mm and tube fitting with shorter thread M12 x 1
4
Hydraulic unit to right front brake caliper
Identification: diameter 5.25 mm and tube fitting with thread M 10 x 1
5
Hydraulic unit to primary piston circuit of master brake cylinder
Identification: diameter 8.5 mm or diameter 6 mm and tube fitting with longer thread M12 x 1
6
Hydraulic unit to master cylinder secondary piston circuit