Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Remove the oil return line bolts - arrows -.
-
Remove the transmission to oil pan bolts - arrows -.
-
Loosen the oil pan bolts on the flywheel side using (3185) and remove them using (T10058).
-
Remove the remaining bolts and remove the oil pan. Loosen the oil pan with light blows from a rubber mallet if necessary.
-
Remove the sealant residue from the cylinder block with a flat scraper.
-
Use a rotating plastic brush to remove any remaining sealant on the oil pan.