Passat Wagon L4-2.0L Turbo (BPY) (2008)
7
Coupling Rod
8
Intake Flap Motor (V157) with Intake Manifold Runner Position Sensor (G336)
‹› Removing and installing, refer to => [ Intake Flap Motor with Intake Manifold Runner Position Sensor ] See: Powertrain Management/Fuel
Delivery and Air Induction/Sensors and Switches - Fuel Delivery and Air Induction/Variable Induction Position Sensor/Service and Repair.
9
Bolt
‹› 7 Nm
10
to Evaporative Emission (EVAP) Canister
11
Hose
12
EVAP Canister Purge Regulator Valve 1 (N80)
13
Hose
14
Double Check Valve
‹› Checking, refer to => [ Double Check-Valve, Checking ] See: Powertrain Management/Emission Control Systems/Evaporative Emissions
System/Evaporative Check Valve/Testing and Inspection.
15
Intake Manifold Support
16
Bolt
‹› 25 Nm
17
Nut
‹› 10 Nm
18
Bonded Rubber Bushing
19
Throttle Valve Control Module (J338)
‹› With throttle drive (for Electronic Power Control (EPC)) (G186), throttle drive angle sensor 1 (for EPC) (G187) and throttle drive angle
sensor 2 (for EPC) (G188).
‹› Removing and installing, refer to => [ Throttle Valve Control Module ] See: Powertrain Management/Fuel Delivery and Air Induction/Relays
and Modules - Fuel Delivery and Air Induction/Variable Induction Control Module/Service and Repair/Removal and Replacement.
20
Bolt
‹› 7 Nm
21
Seal
‹› Replace if damaged.
22
Bolt
‹› 5 Nm
23
Intake Air Temperature (IAT) Sensor (G42)
24
Bolt
‹› 10 Nm