Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Remove the oil pump chain sprocket and disengage the chain from the balance shaft drive.
-
Loosen the bolts for the balance shaft drive working from the outside toward the inside and remove it. Oil pump with balance shaft drive overview.
Refer to => [ Oil Pump with Balance Shaft Drive Overview ] See: Engine Lubrication/Service and Repair/Lubrication System Overview.
Installing and Adjusting
‹› Chain tensioner pre-loaded, refer to => [ Chain Tensioner, Pre-tensioning ].
-
Place the intermediate plate as shown onto the alignment bushings - arrows - in the balance shaft drive.