Passat Wagon L4-2.0L Turbo (BPY) (2008)
Hazard Warning Switch: Service and Repair
Instrument Panel Lamps and Switches
Emergency Flasher Switch (E3)
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
The following component is integrated in Emergency Flasher Switch:
‹› Emergency Flasher Indicator Lamp (K6)
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409),
screwdriver) will be positioned, using commercially available adhesive tape.
‹› Remove the panels only in the sequence indicated.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Remove panel - 2 - using (3409).
-
Remove panel - 1 - using (3409).
-
Remove panel - 5 - using (3409).
-
Remove panel - 4 - using (3409).
-
Remove panel - 3 - using (3409).
-
Remove the mounting bolts - arrows - and remove bracket - 1 - with Emergency Flasher Switch.