Passat Wagon L4-2.0L Turbo (BPY) (2008)
Headlamp Alignment Control Module: Service and Repair
Headlamps
HID Headlamp Range/Cornering Lamp Control Module (J745)
-
Remove the glove compartment.
-
Unlock the connector in - direction of arrow - and disconnect the connector - 1 - from the headlamp range/cornering lamp control module - 2 -.
-
Remove the mounting bolts - arrows - and remove headlamp range/cornering lamp control module - 1 -.
Installing:
Install in reverse order of removal, noting the following:
‹› After installing a new Headlamp Range/Cornering Lamp Control Module, module must be coded, refer to => [ Headlamp Range/Cornering Lamp
Control Module, Coding ] See: Testing and Inspection/Component Tests and General Diagnostics/HID Headlamps and then headlamp basic
setting must be performed.
-
Check headlamp for function.
-
Check headlamp adjustment and adjust headlamp if necessary.