Passat Wagon L4-2.0L Turbo (BPY) (2008)
‹› Tail lamp connector - 2 - must engage audibly in side panel when connecting.
‹› Connector is locked correctly when latching button - 3 - is engaged!
‹› Make sure that both spring-loaded retaining lugs engage audibly when inserting tail lamp.
-
Tighten the nut on the tail lamp assembly to the tightening specification. Refer to => [ Fastener Tightening Specifications, Tail Lamp Assembly In
Side Panel ] See: Specifications/Fastener Tightening Specifications, Tail Lamp Assembly In Side Panel.
-
After installing tail lamp, check gap dimension to body and correct it if necessary via the double bolt.