Passat Wagon L4-2.0L Turbo (BPY) (2008)
‹› These contacts can be removed at every other contact housing in the event they are not required.
‹› Repair wires which have already been equipped with corresponding contacts crimped on are available.
Wiring Eyelets, Repairing
Wiring Eyelets, Repairing
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50Nm (VAG1331)
‹› Do not use rust remover, contact spray or grease because the lack of friction will cause the torque to be exceeded when installing and this will lead
to the threaded connection breaking.
‹› The gray sanding pads are for slight contamination and suitable for "soft surfaces". The red sanding pads are for heavy contamination and suitable
for "hard surfaces".
CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to => [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Precautions and => [ Battery Safety Designation ] See: Starting and
Charging/Battery/Service Precautions/Battery Safety Designation!
-
Disconnect battery.
-
Loosen the cap nut and remove the wiring eyelet from the threaded connection.