Passat Wagon L4-2.0L Turbo (BPY) (2008)
If indication jumps to approx. 140° C:
-
End diagnosis and switch ignition off.
-
Replace the Intake Air Temperature (IAT) Sensor (G42).
If indication remains at approx. -40° C or -46° C:
°Testing if display approx. 140 C:
-
Disconnect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector - arrow -.
If indication jumps to approx. -40° C or -46° C:
-
End diagnosis and switch ignition off.
-
Replace the Intake Air Temperature (IAT) Sensor (G42).
If the indication remains at approx. 140° C:
Checking wiring
If the manufacturers test box is being used. Perform the following step.
-
Install the test box.
If the manufacturers test box is not being used. Perform the following step.
-
Remove the Motronic Engine Control Module (ECM) (J623). Refer to => [ Motronic Engine Control Module J623, Replacing ] See: Engine