Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
End diagnosis and switch the ignition off.
If the intake air temperature does not decrease:
-
Replace the Intake Air Temperature (IAT) Sensor (G42).
If the intake air temperature does decrease:
Checking internal resistance
-
Disconnect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector - arrow -.
-
Using a multimeter, check the Intake Air Temperature (IAT) Sensor (G42) terminals 1 to 2 for resistance.
Use the chart below for the specified values:
‹› Area A: Resistance values 0 to 50° C.
‹› Area B: Resistance values 50 to 100° C.
Specified values: