Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-799004.png)
-
Press the Motronic Engine Control Module (ECM) (J623) retaining catches out - arrows - and partially remove the Motronic Engine Control
Module (ECM) (J623) from the mounting frame.
-
Bend the raised ends - 1 - of the locking bracket outward.
-
Using locking pliers, remove the shear bolts - 2 - and the locking bracket.
-
Disconnect the Motronic Engine Control Module (ECM) (J623) electrical harness connectors - 1 -.
-
Remove the Motronic Engine Control Module (ECM) (J623) from the mounting frame.
