Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Pull (3370) outward and release securing mechanism from connector.
-
Swing bracket - 3 - back - arrow - and disconnect bracket from control module - 4 -.
-
Remove three nuts - arrows - (9 Nm).
-
Remove the control module from the vehicle.
Installation
-
To install, perform the steps used for removal in reverse order.
-
Switch on ignition.
CAUTION!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery.
-
If the control unit was replaced, it must be coded. Adapting components (coding). Refer to => [ Components, Adapting ] See: Airbag (Overview)
Driver Side Airbag Unit
Airbag
Driver Side Airbag Unit
‹› Removal and installation of airbag unit is described for multi-function steering wheel.