Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Position flat wire - 6 - of Front Passenger Seat Occupied Sensor (G128) into corresponding recess on left rear edge of upholstery.
-
Pull off adhesive strip - 7 - from Front Passenger Seat Occupied Sensor (G128) - arrow C - and adhere flat wire on to upholstery in this area.
-
Position Front Passenger Seat Occupied Sensor (G128) - 8 - and wiring harness - 9 - into corresponding recesses on rear edge of upholstery.
-
On seats with a massage-/ventilation function, position cover - 1 - on upholstery, fleece - 2 - must be located on lower side of cover when doing
this.